Table of Contents
Advertisement
Quick Links
Mission Two Drawer Desk
Thank you for purchasing our Mission Two Drawer Desk. Assembly of this product
requires a Phillips screwdriver and a hammer. We have found it helpful to have a second
person present in at least one step of the assembly.
0GVJ9081008
Advertisement
Table of Contents
Related Manuals for L.L.Bean Mission Two Drawer Desk
Summary of Contents for L.L.Bean Mission Two Drawer Desk
- Page 1 Mission Two Drawer Desk Thank you for purchasing our Mission Two Drawer Desk. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in at least one step of the assembly.
- Page 2 Read through these instructions thoroughly. We have found this to be of great value when first assembling this product. Remove all parts and hardware from packing material. Place wooden parts on non-abrasive surface (like carpet or carton) to prevent damage to finish.
- Page 3 STEP 4 Attach Bottom Stretcher (C) to Side Assemblies (B) and (E) using four 2-1/4” screws inserting them through the holes in the Side Assemblies (B) and (E) then into the predrilled holes in the Bottom Stretcher (C). Tighten all screws. STEP 5 Attach drawer pulls to Drawers (D) using the screws provided.
- Page 4 STEP 7 Turn unit upright. Have a second person help if needed. STEP 8 Place flush plugs to cover screw holes on outside of Side Assemblies (B), tap lightly until flush. CARE Dust as needed with soft cloth. Clean with damp cloth and mild solution of dish soap.
Need help?
Do you have a question about the Mission Two Drawer Desk and is the answer not in the manual?
Questions and answers
Is it possible to obtain a parts package for the Mission Desk? I am disassembling mine to move it and would like to replace the plugs which I plan to drill out so I can remove the screws.