Step 2: Remove All Parts And Hardware From Packing Material.; Step 3: Identify And Count Hardware Using Diagram. - L.L.Bean MISSION COFFEE TABLE Quick Start Manual

STEP 1
Read through these instructions
thoroughly before beginning
assembly. We have found this to
be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware
from packing material. Wooden
pieces should be placed on a non-
abrasive surface (like the carton or
carpet) to prevent damage to the
finish. Identify all parts using
diagram at right.
STEP 3
Identify and count hardware using diagram
at right.
Assembly of this product requires a Phillips
screwdriver and a hammer. We have found
it helpful to have a second person present in
at least one step of the assembly.
STEP 4
Lay one side assembly (A) on edge
and attach to bottom shelf (B) using
two 1 ¼" screws. Thread screws
into counter-sunk holes in
crosspiece into the predrilled holes
in the bottom shelf. Do not tighten
screws. Attach both stretchers (C)
using two 1 3/4" screws. Thread
screws into counter-sunk holes in
leg into the predrilled holes in
stretcher. Do not tighten screws.
Repeat for other side.