Related Manuals for L.L.Bean MISSION MEDIA CENTER
Summary of Contents for L.L.Bean MISSION MEDIA CENTER
- Page 1 MISSION MEDIA CENTER Thank you for purchasing our Mission Media Stand. Assembly of this product requires the use of a Phillips screwdriver and hammer. We have found it helpful to have second person assist with assembly. 7400 0PKW9140106...
- Page 2 STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non-abrasive surface (like the carton or carpet) to prevent damage to PARTS the finish.
- Page 3 STEP 7 Place Top Surface (A) as shown to the right so that holes in Sides (C) line up with pilot holes in the skirts of Top Assembly (A). Fully tighten all the screws on both sides at this time. STEP 8 Finally, tap Wooden Plugs into holes with hammer to conceal screws.
- Page 4 CARE Dust as needed with a soft cloth. Clean with damp cloth and mild solution of dish soap. Polish with soft cloth and polish that contains no pigments or silicone. www.llbean.com Product Support 1 800 341 4341...