Do you have a question about the MISSION FIRESIDE BENCH and is the answer not in the manual?
Questions and answers
Susan
February 24, 2025
How do you remove the wood plugs to tighten the ends of the top skirt?
1 comments:
Mr. Anderson
May 14, 2025
The instructions do not provide a method for removing the wood plugs. Therefore, it is not specified how to remove them to tighten the ends of the top skirt.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for L.L.Bean MISSION FIRESIDE BENCH
Summary of Contents for L.L.Bean MISSION FIRESIDE BENCH
Page 1
MISSION FIRESIDE BENCH These instructions will work for both the Large and Small bench. Thank you for purchasing our Mission Fireside Bench. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person assist with assembly.
Page 2
STEP 1 Read through these instructions thoroughly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Place wooden parts on non-abrasive surface (like carpet or carton) to prevent damage to finish.
Page 3
STEP 5 Attach second Side Assembly (B) using same technique as in STEP 4. STEP 6 Attach shelf (C) to each side assembly stretcher with four 1 1/4" screws. Thread screws into predrilled holes in side assembly and into predrilled holes in shelf ends.
Page 4
CARE Dust as needed with soft cloth. Clean with damp cloth and mild solution of dish soap. Polish with soft cloth and polish that contains no pigment or silicone. www.llbean.com Product Support 1 800 341 4341...
Need help?
Do you have a question about the MISSION FIRESIDE BENCH and is the answer not in the manual?
Questions and answers
How do you remove the wood plugs to tighten the ends of the top skirt?
The instructions do not provide a method for removing the wood plugs. Therefore, it is not specified how to remove them to tighten the ends of the top skirt.
This answer is automatically generated