Installing The Memory - TYAN FS65-B5521 Service Engineer's Manual

4.7

Installing the Memory

Before installing memory, ensure that the memory you have is compatible with the
motherboard and processor. Check the TYAN Web site at
details of the type of memory recommended for your motherboard.
The following pictures show common types of DDR3 memory modules.
 This platform supports Unbuffered DDR3, Registered DDR3, and LR DIMM
(Load Reduced DIMM) DDR3 for buffered memory solutions demanding
higher capacity memory subsystems.
 DDR3 data transfer rates of 1066, 1333, and 1600 MT/s are supported
 Each memory channel is 72 or 64 bits wide for ECC or Non-ECC
Both 1.5V and 1.35V DDR3 DIMMs are supported

Up to 8 ranks are supported per memory channel. DIMMS may be 1, 2 or 4

ranks per module.
 All installed memory will automatically be detected. No jumpers or settings
need to be changed for memory detection.
 All memory must be of the same type and density.
and LRDIMM memory types can NOT be mixed and matched on the same
motherboard.
83
http://www.tyan.com
http://www.tyan.com
Registered, Unbuffered,
for