Telnet Access - SignaMax 065-1063FS Series User Manual

Signamax 065-1063FSx series RS-232/422/485 to 100Base/FX Device Server / Media Converter
If using the Menu-driven interface. Select the System Information from the Main
Menu and following screen will appear. Use TAB key to move the cursor and <Enter>
to change the value. Once change the value, select <SAVE> to apply the changes.
After entering the new IP address the system will confirm whether the operation is
successful.
NOTE:
Copy the new address down on a piece of paper. You will need the address when you
are going to use Telnet or set up data transfer/communication connection.
Warning
IP addresses are unique! If an address isn't available, please contact the
appropriate authorities to apply for one.
5.2

Telnet Access

The Device Server / Managed Media Converter is accessible via a Telnet. At the
command prompt type telnet 192.168.0.254 (If connecting with default IP). You will be
prompted to enter the user name and password as mentioned and shown in the topic
Console Port Access. Use the CLI or the Menu-driven interface to perform the changes.
NOTE:
The only limitation of Telnet Access is that users can not assign a new IP address to
the device server / managed media converter. Please use Console Port Access or
Web Access to assign a new IP address to the unit.
12