Table of Contents
Advertisement
Signamax 065-1063FSx series RS-232/422/485 to 100Base/FX Device Server / Media Converter
5
User Interface Startup
There are two separate methods for configuring this Device Server / Managed Media
Converter for use. In the first section of this chapter, the Command line Interface (CLI)
or Menu-driven interface via the Console Port to set the device IP and TCP
configuration to monitor/managed the attached serial device via Serial IP Redirector
software. The second section will describe CLI or Menu-driven via Telnet configuration.
First, make the connection below:
Device
RS-232 Cable
Server
Female
DIP Switch 1 set to the 'ON' position
5.1
Console Port Access
The Device Server / Managed Media Converter is accessible via a terminal emulator
attached to the RS-232 console port. Please follow the steps below.
1. Attach the serial cable to COM port of computer and serial port of the device server.
2. Select Hyper Terminal from (start menu
communication) a window will appear, assign the connection name. Then select
the correct available COM port (COM1 or COM2). After this enter the port settings
as described below:
Bits per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
3. Once connection is established, you will see a log-in screen.
Female
Computer
10
programs
Accessories
Advertisement
Table of Contents
