Port Connections - Extreme Networks BlackDiamond 6800 Hardware Installation Manual

P C
ORT
The BlackDiamond 6800 switch supports the following I/O modules:
• G4X module
The G4X module has four Gigabit Ethernet ports, using standard Gigabit Interface
Connectors (GBICs). The G4X module supports 1000BASE-SX, 1000BASE-LX, and
1000BASE-LX70 GBIC modules.
• G6X module
The G6X module has six Gigabit Ethernet ports, using standard GBICs. The G6X
module supports 1000BASE-SX, 1000BASE-LX, and 1000BASE-LX70 GBIC modules.
• G8Xi module
The G8Xi module has eight unpopulated GBIC-based Gigabit Ethernet ports. The
G8Xi module supports 1000BASE-SX, 1000BASE-LX, and 1000BASE-LX70 GBIC
modules.
• G8SXi module
The G8SXi module has eight Gigabit Ethernet ports, using standard MT-RJ
connectors. The G8SXi module supports 1000BASE-SX only.
• G12SXi module
The G12SXi module has twelve Gigabit Ethernet ports, using standard MT-RJ
connectors. The G12SXi module supports 1000BASE-SX only.
• F32T module
The F32T module has 32 10/100 Mbps autosensing Ethernet ports, using standard
RJ-45 connectors. The F32T module supports 10BASE-T and 100BASE-TX.
• F48Ti module
The F48Ti module has 48 10/100 Mbps autosensing Ethernet ports, using standard
RJ-45 connectors. The F48Ti module supports 10BASE-T and 100BASE-TX.
• F32F module
The F32F module has 32 100 Mbps Ethernet ports, using standard MT-RJ connectors.
The F32F module supports 100BASE-FX in full-duplex mode.
Caution: Modules that use SX, LX, LX70, and FX interfaces contain Class 1
laser devices. Invisible laser radiation can occur when open. Avoid direct eye
exposure to beam.
BlackDiamond Switch Hardware Installation Guide
ONNECTIONS
S F
UMMARY OF EATURES
1-3