Advanced Config; Vlan Config; Vlan Configuration; Vlan Attributes - 3onedata ES5026 User Manual

5.5 Advanced Config

5.5.1 VLAN Config

The System VLAN function consist of two parts: one is VLAN configuration, which mainly include creating
VLAN, add VLAN membership; the other is VLAN property, the user can define PVID for every ports.

5.5.1.1 VLAN Configuration

The Switch allows users to create/delete VLAN, users can elect a port to associate with the VLAN
membership. The default VLAN is "VLAN 1", it's the management VLAN, all switch ports are defaulted in
this VLAN. Refer to Picture 5.1.1, users can create a new VLAN(called VLAN 2), and add port 1~4 to this
new VLAN.

5.5.1.2 VLAN Attributes

Please configure default VLAN ID(PVID). PVID can be renamed according to Port VLAN ID when connect
PDs to the switch, but the PVID will be defaulted as "1" when the port is used to uplink or downlink to
another switch.Please refer to the below picture.
Picture 5.5.1.1 Vlan Configuration
Picture 5.1.2 VLAN Attributes
11
User manual