Management Account; Port Config; Bandwidth Allocation - 3onedata ES5026 User Manual

5.4.2 Management Account

Users can register new user name and password or reset password in this page. It will automatically jump to login
interface after the register or reset finished. The user can login in with new user name.
Notice: Remember your user name and password.

5.4.3 Port Config

You can choose from two port configurations: Enable and Disable. Click "Enable" to open the port, click
"Disable" to close the port, the default setting is "Enable".
There are 5 types of port modes for choosing, they are 10Harf,10Full,100Harf,100Full, auto-negotiation. Default
port mode is auto-negotiation, please change modes in pull-down list. The flow control function of system is
closed in default resetting, open it when needed.

5.4.4 Bandwidth Allocation

The Bandwidth Page allows user to define the bandwidth settings for specified egress and ingress interfaces. The
user can limit maximum burst ingress flow, the port flow control function works when the bandwidth limit is
exceeded. The flow control settings include "Enable" and "Disable", default setting is "Enable". Default flow rate
is not limited, user can reset the flow rate between
Picture 5.4.2.1 Account Management
Picture 5.4.3.1 Port Config
Picture 5.4.4.1 Bandwidth Allocation
0Kbit/sec -1048544Kbit/sec.
10
User manual