Warranty; Declaration Of Conformity; Technical Data - ensto ECO10BTW-J Installation And Operating Instructions Manual

9.

Warranty

The warranty period for Ensto ECO thermostats is 2 years from the date of purchase but
no longer than 3 years from the date of manufacture. Warranty conditions, see the product
card www.ensto.com.
10. Disposal
Do not dispose of electrical and electronic devices including their accessories with
the household waste.
The product's cardboard packing is suitable for recycling.
When a heating system is at the end of the life cycle the cables, conduits and electronic
components must be disposed of properly according to local recycling guidelines.
11.

Declaration of Conformity

Hereby, Ensto Building Systems Finland Oy declares that the radio equipment ECO10BTW-J
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: www.ensto.com.
12.

Technical Data

Supply voltage
Switch
Rated current
Maximum load
Nominal residual operating current
RCD type
Operating temperature range
Thermostat adjustment range
Floor sensor
Floor sensor resistance values
Enclosure class
Pollution degree rating
Rated impulse voltage
Power in standby
Radio frequency range
Radio max. power
24 / 44
230 V -15%, +10%, 50 Hz
2-pole
10 A
2300 W
30 mA
A
-20 ... +30 °C
+5 ... +50 °C
NTC, 47 kΩ/25°C, cable 4m (extendable to 10m)
Table 1, on page 2 (sensor not connected)
IP31
2
4 kV
< 0,5 W
2,4 ... 2,483 GHz
+3 dBm
RAK125 / 16.4.2021