Figure 4-3
4.5.1
Encoder type
Encoder type "not available"
An encoder type setting of "not available" for Encoder x means that Axis x does not exist, or that
it is not to be operated. User data transmitted for this axis in the PROFIBUS message frame are
empty.
Encoder type TTL
Encoder parameters:
• Resolution
Encoder resolution in encoder pulses per encoder revolution
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B
"DP Slave Properties" dialog box, "Encoder" tab
Parameter assignment
4.5 Function parameters
51