Residual Risks Of Power Drive Systems - Siemens SIMOTION ADI4 Equipment Manual

Standards and approvals
A.2 Residual risks of power drive systems
Note that the final statement on compliance with the standard is provided by the respective label
attached to the individual unit.
Declaration of conformity
The current Declaration of conformity is available on the Internet at Declaration of conformity.
A.2

Residual risks of power drive systems

Residual risks of power drive systems
The control and drive components of a drive system are approved for industrial and commercial
use in industrial line supplies. Their use in public grids requires a different configuration and/or
additional measures.
These components may only be operated in closed housings or in higher-level control cabinets
with protective covers that are closed, and when all of the protective devices are used.
These components may only be handled by qualified and trained technical personnel who are
knowledgeable and observe all of the safety instructions on the components and in the
associated technical user documentation.
When assessing the machine's risk in accordance with the respective local regulations (e.g. EC
Machinery Directive), the machine manufacturer must take into account the following residual
risks emanating from the controller and drive components of a drive system:
92
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B