Alignment - Siemens SIMOTION ADI4 Equipment Manual

Parameter assignment
4.6 Parameter assignment of the DP communication
4.6.9

Alignment

Procedure
The alignment is used to transfer the values of the current ADI4 DP slave displayed in the
"Isochronous operation" tab to all the other ADI4 DP slaves of the configuration.
Dialog: End
Dialog: DP slave properties
Tab: Isochronous operation
OK
Figure 4-16
72
Button: Alignment
"DP Slave Properties" dialog box
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Equipment Manual, 07/2017, A5E33446849B