Table of Contents
Advertisement
"Oil-Less" Scroll Laboratory Air
Appendix C: TotalAlert Embedded Control System
C.2.2 5.7" User Interface for Source Systems
Figure C.3 Main Screen
The primary master screen user interface is
displayed on a 5.7" 640 x 480 pixel display as
shown in Figure C.3. The interface is designed
such that any information can be accessed with a
minimal amount of touches by the user.
The 5.7" screen is divided into two main areas –
the top portion above the toolbar which changes
depending on the icon selected on the toolbar
and bottom portion which contains the toolbar
(Figure C.4) and is available on most screens.
Figure C.4 5.7" Screen Toolbar
From left to right, the toolbar icons represent the
following:
Main Screen (default) ** If No Dryers
(Image is 2x wide and Dryer Image
is not shown).
** Dryer Information (Medical Air with
Dryers Only)
Service
Alarms (no Shutdown)
Shutdown
Event History Log
System Confi guration Settings
Horn Silence
C.2.3 5.7" Boot/Communication Screen
Figure C.5 Boot/Communication Screen
The boot/communication screen (Figure C.5)
shows at boot time and will change to the
default main screen once communication and
compatibility are confi rmed:
•
If a RS485 link failure is detected the link icon
at the top of the screen will appear and the
bottom version button will appear to allow
the user to check display board (PCB1) version
information.
C-3
4107 9006 25.11
Advertisement
Table of Contents
Troubleshooting
