Table of Contents
Advertisement
Optimus Adaptive Trim Tab System | Adaptive Trim Tab System
Use this control with caution: turn one click at a time and wait a
moment to see how the boat reacts before making further adjustments.
While this control can be used to correct a list due to uneven loading,
best practice is to load your boat as evenly as possible, and to keep
passenger movement at a minimum while underway at high speeds.
The relative positions of the tabs are maintained when using the Bow
Down and Bow Up controls, so if you've used the roll control to
correct for a list it will remain corrected as you alter the bow position.
Home
Press once to retract actuators to their fully retracted home position.
Use this button when:
• you encounter difficult sea conditions and need to raise the bow,
• preparing to load the boat onto a trailer,
• preparing the boat for lifting.
The home button will immediately override any automatic operation
of the trim tab actuators and return them to home position. When the
tabs reach the home position the trim tab position indicator LED will
blink three times.
Favorite
The Favorite button has two functions, described in detail in section 5.2:
1. Set and recall a Favorite trim tab position.
2. Toggle Holeshot mode on or off.
You can switch between these functions by pressing and holding the
Favorite and Bow Up buttons together for three seconds. The system
status indicator will briefly flash magenta to show the Holeshot function
is enabled, or green to show the Favorite function is enabled.
5.1.1
Adjusting LED brightness
Press and hold the Home and Favorite buttons together.
✓ The system status indicator flashes blue and the starboard tab position
indicators all light up.
✓ As you continue to hold the buttons, the brightness of the LEDs will cycle
through five levels.
Release the buttons at the desired brightness level.
EN
7
Advertisement
Table of Contents
