Table of Contents
Advertisement
27 I Pool Heat Pump
6
Parameter setting function
6.1.1 Five-key remote control settings
WARNING: The parameter settings, provided for professional after-sales
maintenance personnel. Any setting parameter changes resulting in machine
failure or damage is not covered under warranty.
Step 1: Long press the 3S power button "
P parameter setting (can be set in the off state);
Step 2: Press "
press the 3S power button "
Step 3: Combine "
Step 4: Then long press the 3S power button "
off button to return to the main interface; if there is no operation for 60s in
the parameter setting interface, it will automatically exit and return to the main
interface.
Function 1: Long press the mode key
S parameter setting, (repeat steps 1~4).
Function 2: Long press the timer key
the F parameter setting, (repeat steps 1~4).
Function 3: Manual defrost: long press the mode key
seconds.
Function 4: Mode switching: long press the timer button
proceed.
Function 5: Restore factory settings: Long press the mode key
+ up key
Function 6: Switch the light board display: long press the up key
for 3 seconds.
Function 7: Wi-Fi network configuration: Long press the switch button
up key
+ the down key
" or "
" to turn pages to query parameters, and then long
" to select the parameter value;
" or "
" to modify the parameter value
+ down key
for 5 seconds.
for 3 seconds.
" + "
" once to enter the system
" to confirm, press the on/
+ up key
for 3 seconds to enter the
+ the up
key for 3 seconds to enter
+
down key for 3
for 3 seconds to
+ timer key
+ down key
, the
Advertisement
Table of Contents
