Mode Switching - Waterco Electroheat ECO-V Installation And Operation Manual

Pool heat pump
Hide thumbs Also See for Electroheat ECO-V:
Table of Contents

Advertisement

19 I Pool Heat Pump
1.3
Unlock operation steps
1.3.1 Five-key remote control (lock): Long press this switch button for
operation of the remote control for 60 seconds) to lock the remote control (used
to prevent children from touching and playing randomly) , In the locked state,
pressing other keys is invalid.
Lock light
1.3.2 Five-key remote control (unlocked): In the locked state, long press this key
3 seconds to change from the locked state to the unlocked state, and press other
keys to operate at this time.

2. Mode switching

2.1
Icon definition
Energy saving mode
The heat pump compressor operates in the most energy-efficient and way.
Heating mode
In this mode, the heat pump continues to heat the water temperature to the set
temperature point.
Powerful work mode
In this mode, the heat pump operates at the highest frequency, heating to the set
temperature in the shortest time;
Energy-saving heating mode
Powerful heating mode
Cooling mode
In this mode, the heat pump uses cooling to reduce the water temperature to the
target temperature.
Light this icon to indicate that it is locked.
Modes Selection
3s (or no
for

Advertisement

Table of Contents
loading

Table of Contents