Security Menu - Getac B320 User Manual

Security Menu

The Security menu contains the security settings, which safeguard your
system against unauthorized use.
Information
Supervisor Password Is:
User Password Is:
Set Supervisor Password:
Set User Password
Password on Boot:
Set HDD 0 Password:
HDD 0 Password:
TPM Setup Menu

F1 Help
Esc Exit
NOTE:
You can set the user password only when the supervisor password has

been set.
 If both the administrator and user passwords are set, you can enter any
of them for starting up the system and/or entering BIOS Setup. But the
user password only allows you to view/change the settings of certain
items.
A password setting is applied right after it is confirmed. To cancel a

password, leave the password empty by pressing the Enter key.
Supervisor/User Password Is shows whether you have set the
supervisor/user password or not for the system.
Set Supervisor/User Password sets the supervisor/user password. When
typing the password, first make sure that Num Lock is off, and then type the
password in the entry fields and press Enter. Confirm your password by
5-12
Using BIOS Setup and System Recovery
Main Advanced
Select Item +/-
↑↓
Select Menu Enter
←→
Security Boot
Item Specific Help
Cleared
Cleared
Set or clear the
[Enter] Enter
Supervisor account's
[Enter]
password.
[Disabled]
[Enter]
Cleared
Change Values
Select  Sub-Menu
Exit
F9 Setup Defaults
F10 Save and Exit