Turning On/Off the WWAN Radio
To turn on the WWAN radio:
1. Make sure that the RF switch is at the ON position. (Open the cover to
access the switch.)
2. To turn on the WWAN radio, click the WWAN button in the Quick Bar as
shown below (an X over the button means the radio is currently off.)
NOTE: To open the Quick Bar, right-click the Getac Utility icon (
on Windows taskbar and select Quick Bar.
To turn off the WWAN radio:
You can turn off the WWAN radio by using the Quick Bar or WWAN utility.
If you want to turn off all wireless radio, slide the RF switch to the OFF
position.
Setting up a WWAN Connection
To set up a WWAN connection for the first time, follow these steps:
1. Make sure that the SIM card is inserted and the WWAN function is
enabled (as described above).
) located
Operating Your Computer
2-29