Security Menu - Getac S410 G4 SP3DTA34SDXI User Manual

Security Menu

The Security menu contains the security settings, which safeguard your
system against unauthorized use.
NOTE:
You can set the user password only when the supervisor password has

been set.
If both the administrator and user passwords are set, you can enter any

of them for starting up the system and/or entering BIOS Setup. However,
the user password only allows you to view/change the settings of certain
items.
A password setting is applied right after it is confirmed. To cancel a

password, leave the password empty by pressing the Enter key.
Set Supervisor/User Password sets the supervisor/user password. You can

set the supervisor/user password to be required for starting up the
system and/or entering BIOS Setup.
Password on Boot allows you to enable or disable the entering of

password for booting up your system.
Secure Boot Configuration You can access this item only after setting the

Supervisor Password.
Secure Boot enables or disables Secure Boot. Secure Boot is a feature
that helps prevent unauthorized firmware, operating systems, or UEFI
drivers from running at boot time.
Delete all Security Boot keys deletes all secure boot variables.
Restore Factory Defaults resets secure boot variables to manufacturing
defaults.
Set HDD 0 User Password sets the password for locking the Primary

Master hard disk drive. After setting a password, the hard disk drive can
only be unlocked by the password no matter where it is installed.
TPM Setup Menu sets various TPM parameters.

TPM Support enables or disables TPM support. TPM (Trusted Platform
Module) is a component on your computer's mainboard that is specifically
designed to enhance platform security by providing a protected space for
key operations and other security critical tasks.
Change TPM State allows you to select between No Change and Clear.
68