Table of Contents
Advertisement
5. Close the cover and secure with four screws.
Turning On/Off the WWAN Radio
To turn on the WWAN radio:
1. Make sure that the RF switch is at the ON position. (Open the cover to
access the switch.)
2. Right-click the Getac Utility icon (
Quick Bar. Then click the WWAN button in the Quick Bar as shown below
(an X over the button means the radio is currently off.)
To turn off the WWAN radio:
You can turn off the WWAN radio the same way you turn it on.
40
) on Windows taskbar and select
Advertisement
Table of Contents
