Table of Contents
Advertisement
Press
to enter the register mode.
1
Press 3 to choose the one-touch fax number mode.
Press the top one-touch button. (If you are adding a number to a
list you have already begun, press the next available one-touch
button.)
You see the following display:
Enter the first fax number using the keypad. You can enter up to
22 digits, but
display can show only the last 16. Include the
the
area code if
fax number is outside of your dialing area.
the
Note
If you make a mistake when you are entering this number
use the
cursor key to move the cursor to the incorrect
l
digit. Then retype the rest of the number. If you need to
erase an entire number, see Removing Numbers and
Names later in this chapter.
To register a number, including an outside line
international dialing code, enter the number or code, press
and then enter the fax number. For example, if your
PAUSE,
telephone system requires you to dial 9 before dialing a number,
you would enter
the
appears as a P in
the
FX1:9P5551212.
following: 9
PAUSE 5551212.
display. The following appears on
Using the PriorityFax
access
code or an
The pause
LCD:
the
2-17
Advertisement
Table of Contents
