Table of Contents
Advertisement
PriorityFax 2000 Manual
3-8
Enter
first telephone number using
the
area code if the one-touch number is outside of your dialing area.)
Note
You can enter up to 22 digits, but the display can show
only 16. If you make a mistake when you are entering this
number use the * cursor key to move the cursor to the
incorrect digit. Then retype the rest of the number.
To register a number to dial out
an international access code, enter the number or code, press
and then enter
PAUSE,
as a P in the display. For example, if your telephone
requires you to dial 9 before dialing a number, you would enter
following:
the
9 PAUSE
LCD: TL1:9P5551212
In the space to the left of the top one-touch button, write the name
associated with the telephone number you just entered. Press
NEXT. Now your display
register up to four more one-touch numbers.
When you are through registering one-touch numbers, press
three times to return to the date/time display.
To check your work or for reference, you can print a list of
touch numbers you registered by performing
Make sure no document is in the machine.
Press
FUNCTION. You
Press 2.
keypad. (Include the
the
a central telephone system or
on
telephone number. The pause appears
the
5551212. The following appears on the
TL2:. Repeat the steps above to
shows
see
function display.
the
system
SET
the one-
following steps:
the
Advertisement
Table of Contents
