Table of Contents
Advertisement
PriorityFax 2000 Manual
Installing the output tray
1-6
Shown below are the three ways you can install the output tray,
depending upon your workspace. The vertical and base only
installations use the least desk space, but the horizontal installation
minimizes curling of incoming documents.
Horizontal
Vertical
Base only
To install the output tray base (and the output tray if desired),
follow these steps:
Place the output tray base on the table in front of you. Then insert
the wire output tray paper guide into the holes on either side of
the output tray base as shown below.
Place the fax machine at the edge of the table and locate the two
notches on the front underside of the fax machine.
Advertisement
Table of Contents
