Epson PriorityFax 2000 Owner's Manual page 35

The ready display appears.
Press or lift the handset. You hear the dial tone.
SPKR
Dial the number of the receiving fax machine. (Include the area
code if the receiving fax machine is outside of your dialing area.)
When you hear the fax tone, press
up if you are using the handset. Unless you press
immediately, the line is disconnected and you hear the busy
tone.
Note
If receiving fax machine is not using Auto Answer, a
the
voice may answer. If this happens, ask
start fax reception by pressing
(Since PriorityFax is not a speaker phone, you must use
the handset to talk to the other party.) Press
then hang up when you hear the fax
The fax machine pulls the document through the slot as it sends it;
then it beeps
once when
Transmission Verification feature is turned on, the fax machine
prints a report a few moments later.)
If a fax does not successfully reach its destination, the PriorityFax
displays COMM ERROR, beeps several times, and prints a
communication error report.
promptly. Then hang
START
START
tone.
transmission is complete. (If
Using the PriorityFax
START
other party to
the
and hanging up.
and
START
the
2-9