Telnet Control - CYP CMPRO-U8H8CVE Operation Manual

6.9 Telnet Control

Before attempting to use the telnet control, please ensure that both
the Matrix (via the 'LAN port) and the PC/Laptop are connected to
the active networks.
To access the telnet control in Windows 7, click on the 'Start' menu
and type "cmd" in the Search field then press enter.
Under Windows XP go to the 'Start' menu and click on "Run", type
"cmd" with then press enter.
Under Mac OS X, go to Go→Applications→Utilities→Terminal
See below for reference.
Once in the command line interface (CLI) type "telnet", the IP address
of the unit you wish to control and "23", then hit enter.
Note: The IP address of the Matrix can be displayed on the device's
LCM monitor by pressing the Menu button twice/three times.
13