Table of Contents
Advertisement
Command
UARTBAUD1~8
UARTSW1~8
UARTSW0
UARTBAUD?
UARTSW?
?
Quit
Note: Any commands will not be executed unless followed by a
carriage return. Commands are case insensitive.
Description
Set output A~D's uart baud rate from
1~6
1: 9600bps
2: 14400bps
3: 19200bps
4: 38400bps
5: 57600bps
6: 115200bps
Switch output's UARTto A~H and
allow Matrix to send commands to
Receiver's connected RS-232 device.
Switch output's UART to MCU.
Restoring RS-232 control to the
Receiver output back to Matrix.
Display all the outputs UART baud
Display the UART switching state
Display all the available commands
Exit(for telnet only)
10
Advertisement
Table of Contents
Need help?
Do you have a question about the CMPRO-U8H8CVE and is the answer not in the manual?