Cisco FM3200 Base Installation And Configuration Manual page 96

• If a wireless link is not specified in a Pass list, it will be
assigned the lowest routing priority, but will not be
completely excluded from routing.
3. Example 1: If you want to create a simple Pass list that includes
the link between unit ID numbers 5.2.22.136 and 5.29.252.213
(Figure 37 (page
highest possible priority):
• Cell A1 of the *.CSV file would contain the parameter
5.2.22.136,5.29.252.213,0
• Cell A2 of the *.CSV file would contain the parameter
5.29.252.213, 5.2.22.136,0
Figure 37. Sample Pass list (Example 1)
4. Example 2: If you want to create a Pass list that includes the
links between unit ID numbers 5.2.22.136 and 5.29.252.213 (with
routing priority 0), and between unit ID numbers 5.29.252.213
and 5.155.105.128 (with routing priority 1)
• Cell A1 of the *.CSV file would contain the parameter
5.2.22.136,5.29.252.213,0
• Cell A2 of the *.CSV file would contain the parameter
5.29.252.213, 5.2.22.136,0
• Cell A3 of the *.CSV file would contain the parameter
5.29.252.213,5.155.105.128,1
• Cell A4 of the *.CSV file would contain the parameter
5.155.105.128,5.29.252.213,1
Figure 38. Sample Pass list (Example 2)
5. Example 3: If you want to create a simple Block list that includes
the links between unit ID numbers 5.2.22.136 and 5.29.252.213
(Figure 39 (page
• Cell A1 of the *.CSV file would contain the parameter
5.2.22.136,5.29.252.213
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
96)), and give the link routing priority 0 (the
97)):
(Figure 38 (page 96)):
Page 96 of 176