Cisco FM3200 Base Installation And Configuration Manual page 65

The window shows a list of wireless links to other Cisco units that
have been detected by the local unit, and the relative strength of each
wireless link in decibel-milliwatts (dBm).
To do an accurate alignment of a local antenna for a specific wireless link,
do the following steps:
1. Click the -antenna alignment and stats link under GENERAL
SETTINGS in the left-hand settings menu.
• The ANTENNA ALIGNMENT AND STATS window will be
shown
Figure 27.
stats dialog)
2. More than one two-way wireless link may be shown in the
Detected Links table. Find the two-way link for which the local
antenna must be adjusted.
3. Click the
• The ANTENNA ALIGNMENT AND STATS tool will be
shown
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
(Figure 27 (page 65)).
Configurator GUI
Align button.
(Figure 28 (page 66)).
IMPORTANT
The Cisco Transmission Power Control
(TPC) algorithm will be disabled during the
antenna alignment process. This eliminates
the possibility of false radio-transmission
power readings.
(Antenna alignment
Page 65 of 176
and