Electrical Power Requirements - Cisco FM3200 Base Installation And Configuration Manual

9. Electrical power requirements

The following table describes:
• The electrical power requirements for each Cisco hardware
device type.
• Which Cisco hardware devices are capable of receiving power
through an IEEE 802.3 Ethernet port (whether from a power-
supplying device like a compatible network switch, or from a power-
over-Ethernet (PoE) injector), or through a DC IN power supply
port, or both.
• The specific voltage-variation tolerances of each Cisco radio
transceiver unit type.
Table 9. Individual power requirements (FM1000 Gateway and
FM10000 Gateway)
DC IN
First-generation FM10000
Gateway: unit may be equipped
with single 250W non-
redundant AC power supply unit
(input power: 100 Vac to 240
Vac at 50 Hz to 60 Hz).
Table 10. Individual power requirements (FM Ponte kit to FM4200
Mobi)
PoE 24V
passive
PoE
48V
passive
PoE
© 2021 Cisco and/or its affiliates. All rights reserved.
Required input
power
12 Vdc (from mains
AC power adapter
producing a
minimum of 60W
(12V/5A)).
FM Ponte FM1200 FM1300
kit Volo Otto
(model (model
FM1200V- FM1200V-
HW) HW)
X X
Electrical power requirements
FM1000 FM10000
Gateway Gateway
X
X
FM3200 FM3200
Base Endo
(model (model
FM3200) FM3200)
X X
Page 159 of 176
FM4200
Mobi
(model
FM4200)
X