Cisco FM3200 Base Installation And Configuration Manual page 149

Figure 69. Configurator interface (MANAGE PLUG-INS
dialog)
2. Click the red REMOVE link to the right of the correct plug-in
listing.
• The web browser will inform you that deactivating the plug-
in will reboot the unit, and ask for confirmation that you
want to deactivate.
3. Confirm the deactivation.
• The unit will reboot.
• The Deactivation code for the plug-in will be shown to the
right of the plug-in listing, in the Plug-in Deactivation
Codes section (see below).
Figure 70. MANAGE PLUG-INS
Deactivation Codes section)
4. Make a note of the Deactivation code.
5. Log on to the Cisco Partner Portal.
6. Click the
• The Plug-ins web page will be shown
150)).
© 2021 Cisco and/or its affiliates. All rights reserved.
Plug-ins link.
Software Plug-Ins
DIALOG (Plug-in
(Figure 71 (page
Page 149 of 176