Cisco FM3200 Base Installation And Configuration Manual page 119

Figure 51. Configurator GUI (FLUIDITY dialog for
transceiver devices)
2. Cisco radio transceivers are shipped from the factory with
Fluidity functionality disabled. Enable Fluidity functionality by
checking the Fluidity check-box.
3. Select the correct role for the unit by clicking the Unit Role: drop-
down and clicking the correct option from the list below:
• Infrastructure: Choose this setting if the unit is connected
to a wired LAN and/or a network that includes other
Infrastructure nodes, and the unit acts as the network
infrastructure entry point for mobile vehicles.
• Infrastructure (wireless relay): Only choose this setting if
the unit is used as a wireless relay agent to other
infrastructure units.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Page 119 of 176