Table of Contents
Advertisement
26/49
Mounting, demounting and electric installation
10.2.4 Mounting dimensions of the VEP 50.6
8.5
1
①
Drilled hole for the mounting bolts, bore diameter of 5 mm
②
Mounting cut-out
Fig. 10-6: Mounting dimensions of the VEP 50.6 (in millimeters)
10.3 Installation notes for built-in devices
Provide a space of 50 mm on all sides for sufficient cooling and cable routing.
●
The LED display on the operator panel must not be covered.
●
Wire all cables in loops. Use strain reliefs for all cables.
●
Install the operator display only vertically, with a max. deviation of ±45°,
●
measured from the vertical.
Bosch Rexroth AG R911403058_Edition 01
196
2
375
IndraControl VEP 30.6, VEP 40.6,
VEP 50.6 Embedded Terminals
196
Advertisement
Table of Contents
