Wheel Bolts; Full Hubcaps; Wheel Bolt Caps - Seat Mii 2015 Owner's Manual

The caps protect the wheel bolts and should
be remounted after changing the tyre.

Full hubcaps

Fig. 125 Removing the full hubcap
Removing the full hubcap
● Take the wheel brace and the wire hook
›››
from the vehicle tool kit page
Hook the wire through one of the grooves
●
on the hubcap.
Insert the wheel brace onto the wire hook
●
›››
Fig. 125 and pull the hub cap in the direc-
tion shown by the arrow.
Fitting hubcaps
Press the hubcap against the wheel so that
the space for the valve fits over the tyre valve.
Make sure that the hubcap is correctly fitted
all the way around the wheel. If you are using
an anti-theft wheel lock, screw it in the oppo-
site position to the valve.

Wheel bolt caps

Removing the wheel bolt caps
Fig. 126
Removal
Fit the plastic clip (vehicle tools
–
›››
page 172) over the cap until it clicks into
172.
›››
place Fig.
Remove the cap with the plastic clip.
–
The caps protect the wheel bolts and should
be remounted after changing the tyre.
The anti-theft wheel locking bolt has a spe-
cial cap. This only fits on anti-theft locking
bolts and is not for use with standard wheel
bolts.
Emergencies
126.

Wheel bolts

Fig. 127 Changing a wheel: Slacken the
wheel bolts.
Changing a wheel: Tyre valve
Fig. 128
position of anti-theft wheel locking bolt
Only use the tool supplied with the vehicle to
loosen the wheel bolts.
Loosen the wheel bolts only about one turn
before raising the vehicle with the jack.
and
1
.
2
»
175