Table of Contents
Advertisement
Control functions of the instrument
panel display
Fig. 26
Windscreen wiper lever: control but-
tons.
Calling up options
Switch the ignition on.
●
●
If a message or vehicle symbol is dis-
›››
played, press
(
Fig. 26
OK/RESET
●
Press the top or bottom part of the rocker
›››
Fig. 26
switch
until the desired option
B
appears.
Multifunction display (MFI)
The multifunction display (MFI) has two auto-
matic memories: 1 - Partial memory and 2 -
Total memory. The selected memory will be
shown in the lower right-hand corner of the
display.
With the ignition switched on, and memory 1 or
2 displayed, briefly press
one memory to another.
The memory stores the values for the
journey and the consumption from
the moment the ignition is switched
on until it is switched off again.
Trip memo-
If the journey is broken for more than
ry (for a
1
2 hours, the memory is automatically
single jour-
erased. If the journey is continued in
ney).
less than 2 hours after the ignition is
switched off, the new data is added to
the data already stored in the memo-
ry.
The memory stores the values of any
number of journeys, until it counts a
total of 19 hours and 59 minutes of
Total mem-
driving, or 1999.9 km or miles of driv-
2
ory (for all
ing, depending on the type of instru-
journeys).
ment panel fitted. On reaching either
of these limits, the memory is auto-
).
A
matically erased and starts to count
from 0 again.
Possible displays
Menu
Function
Time
Current time in hours (h) and minutes
(min).
Journey dura-
This indicates the hours (h) and mi-
tion
nutes (min) since the ignition was
switched on.
Cockpit
to change from
OK
Menu
Function
Current fuel
The current fuel consumption display
consumption
operates throughout the journey, in
l/100 km; with the engine running
and the vehicle stopped, in l/hour.
Average fuel
After turning on the ignition, average
consumption
fuel consumption in litres/100 km will
be displayed after travelling about
100 metres. Otherwise horizontal
lines are displayed. The value shown
is updated approximately every 5 sec-
onds.
Operating
Approximate distance in km that can
range
still be travelled with the fuel remain-
ing in the tank, assuming the same
style of driving is maintained. This is
calculated using the current fuel con-
sumption.
Distance travelled, after ignition is
Distance cov-
ered
switched on, in km.
The average speed will be shown after
Average speed
a distance of about 100 metres has
been travelled. Otherwise horizontal
lines are displayed. The value shown
is updated approximately every 5 sec-
onds.
Digital display
Current speed displayed digitally.
of speed
Liquid coolant
Digital display of the current tempera-
temperature
ture of the engine liquid coolant.
digital display
»
41
Advertisement
Table of Contents
