Table of Contents
Advertisement
Central locking
Function
Handling
Handling the vehicle
›››
the buttons
key
on the vehi-
lock cylinder or with
›››
cle
Fig. 32
the vehicle mechani-
cal key
Unlocking
Press button
Insert the vehicle key in-
the vehi-
.
to the lock cylinder of
cle.
the driver door and turn
the key in an anticlock-
wise direction.
Lock the
Press button
Insert the vehicle key in-
vehicle.
.
to the lock cylinder of
the driver door and turn
the key in a clockwise
direction.
Unlocking
Press button
Insert the vehicle key in-
the rear lid.
.
to the lock cylinder of
the driver door and turn
the key in an anticlock-
wise direction.
Locking
Press button
Insert the vehicle key in-
the rear lid.
.
to the lock cylinder of
the driver door and turn
the key in a clockwise
direction.
Please note: depending on the operation of
the central locking feature set by a special-
ised workshop, in order to unlock all the
doors and the rear lid, press the button
twice.
Opening and closing
The vehicle key only locks and unlocks the
vehicle if it is within range of the vehicle and
if the battery has enough power.
Fig. 32
in the
Upon locking the vehicle, all turn signals
●
will flash once in confirmation.
›››
Fig.
33.
Upon unlocking the vehicle, all turn signals
●
will flash twice in confirmation.
If the turn signals do not flash in confirma-
tion, at least one of the doors or the rear lid
has been left unlocked.
If the driver door is open, the vehicle cannot
be locked with the key. If you unlock the vehi-
cle without opening any doors or the rear lid,
it will lock again automatically after a few
seconds. This function prevents the vehicle
from remaining unlocked if the unlocking
button is pressed by mistake.
Mechanical locking
Function
Locking the driv-
er door manually.
Using the vehicle's mechani-
›››
cal key
Fig. 33
in the lock
cylinder
To unlock, insert the vehicle key in-
to the lock cylinder of the driver
door and turn the key in an anti-
clockwise direction.
To lock, insert the vehicle key into
the lock cylinder of the driver door
and turn the key in a clockwise di-
rection.
Using the vehicle's mechani-
›››
Function
cal key
Fig. 33
cylinder
To unlock, insert the vehicle key in-
to the lock cylinder of the driver
door and turn the key in an anti-
Locking and un-
clockwise direction.
locking the rear
To lock, insert the vehicle key into
lid.
the lock cylinder of the driver door
and turn the key in a clockwise di-
rection.
If the driver's door is open, it cannot be
locked with the vehicle key.
in the lock
47
Advertisement
Table of Contents
