Seat Mii 2015 Owner's Manual page 196

Complete operations only in the sequence giv-
en:
Unscrew the 2 retaining screws of the wheel arch
›››
1. trim Fig. 147 (arrows) with the screwdriver from
›››
page
the vehicle took kit
Unscrew the expansive rivet in the lower front part
of the wheel arch trim
2.
from the vehicle tool kit and completely remove it
›››
page 172.
3. Carefully fold the wheel arch trim to the side.
›››
Release the connector
4.
it.
›››
Turn the bulb holder
the arrow, in an anticlockwise direction as far as it
5.
will go and remove it, along with the bulb, pulling
backwards.
6. Replace the faulty bulb by a new identical bulb.
Insert the bulb holder in the headlight and turn it
7.
clockwise as far as the stop.
Plug the connector into the bulb holder. The
1
8.
connector must audibly click into place.
9. Replace the wheel arch trim into its position.
Place the expansive rivet in the wheel arch trim
10. and bumper and press it completely inwards
›››
Fig. 147
.
A
Securely screw the 2 retaining screws
11.
(arrows) with a screwdriver.
194
Changing the bulbs in the rear lights
172.
with the screwdriver
A
Fig. 148 and remove
1
Fig. 148 in the direction of
Fig. 149
ment: A: Remove the cover, B: Removing the
tail light units
›››
Fig. 147
Advice
On the side of the luggage compart-
Tail light unit: C: Remove the bulb
Fig. 150
holder, D: Remove the bulbs.
Complete operations only in the sequence
given.
Removing the tail light units
›››
1. Open the rear lid page 50.
Carefully remove the cover towards the lever
1
2.
›››
Fig. 149 A.
Pull the release in the connector
3
›››
3. rection of the arrow Fig. 149 B. Use the screw-
driver in the vehicle tool kit.
Press position and remove the connector
4
4.
›››
Fig. 149 B.
in the di-
2
2