Table of Contents
Advertisement
Boot variable floor
A: open the boot variable floor. B:
Fig. 71
raised boot variable floor.
76
Operation
C: extend the boot downward. D: ex-
Fig. 72
tend the boot forward.
Raise and lower the boot floor
●
To raise the floor, raise handle
in the direction of the arrow and pull from the
›››
floor all the way up
Fig. 71
B.
●
To lower it, guide the floor downward.
Extend the boot downward
Raise the boot floor and push it downward
●
›››
in the rail
Fig. 72
C (arrows)
Place the variable floor over the floor lining.
●
●
If necessary, fold the backrest of the rear
›››
seat forward
page
74.
Extending the luggage compartment forward
Disassemble the luggage compartment tray
●
›››
page
75.
Disassemble the rear headrests
●
●
Fold the backrest of the rear seat forward
›››
page
74.
●
If necessary, expand the boot downward.
CAUTION
Do not let the boot floor fall when closing it.
Always carefully guide it downward in a con-
trolled manner. Otherwise, the lining and the
floor of the boot could be damaged.
Class N1 (commercial) vehicles
For safe vehicle operation, the electrical sys-
tem must work perfectly. Special attention
should be paid so it is not damaged during
›››
Fig. 71
1
adjustment, loading and unloading of trans-
ported objects.
Fastening rings*
In the front part of the luggage compartment,
there may be fastening rings to secure the
luggage.
In order to use the fastening rings, they must
be lifted beforehand.
›››
page
6.
Advertisement
Table of Contents
