Korg Soundlink DRS OASYS PCI User Manual page 85

Hide thumbs Also See for Soundlink DRS OASYS PCI:
Table of Contents

Advertisement

Reference
Volume responds to controller #7 on the selected MIDI channel.
Mute
On, Off. Mute silences the Output Bus.
Mute responds to controller #89 on the selected MIDI channel. 0 is off (not muted),
and any value between 1 and 127 is on (muted).
Solo
On, Off. Solo isolates the Output Bus, temporarily muting all other non-soloed
Output Busses.
Solo responds to controller #90 on the selected MIDI channel. 0 is off (not soloed),
and any value between 1 and 127 is on (soloed).
To Master
On, Off. This button sends the Output Bus through the Master Output Bus, in
addition to the normal output. This can be used for various purposes, including:
To Master can increase DSP processing requirements
Activating an Output Bus's To Master function may sometimes require the
Programs and Effects to be re-arranged within the DSPs. This may decrease the
effective amount of DSP processing power available. In some cases, this may mean
that there may not be enough DSP processing power to play a Multi which
previously played successfully.
If this happen, you can reduce the number of Output Busses routed to the Master
output, or use other methods to reduce the DSP processing load, as described
under "Managing Resources," beginning on page 60.
Master Bus radio button
On, Off. This selects the Master Output Bus.
Mixer Channels and Send Busses assigned to the Master Output will automatically
follow the Master Bus selection; if you change the Master Bus, their outputs will
change as well.
For instance, you might set all Mixer Channels to go to the Master Output, with the
analog outputs selected as the Master Bus for easy monitoring. You could then send
all of the Mixer Channels to the S/PDIF outputs, for recording, simply by switching
the Master Bus to S/PDIF–instead of changing each Mixer Channel individually.
OASYS PCI
Isolating a sound for recording, while still monitoring it through the Master
Output.
Submixing sounds through bus effects, and then sending the submix to the
Master Output (and through any additional effects on the Master Output
Bus).
Output Busses
81

Advertisement

Table of Contents
loading

Table of Contents