Modulation Palette - Korg Soundlink DRS OASYS PCI User Manual

Reference

Modulation Palette

The Modulation Palette allows you to create up to two modulation paths for each
Patch or Effect Control Panel parameter.
You can open the Modulation Palette by clicking on the name of a Control Panel
parameter. For on/off buttons, option-click (MacOS) or CTRL-click (Windows) on
the name.
If the Modulation Palette is already open, clicking on a Control Panel parameter
will change the Modulation Palette to show the settings for that parameter.
When a modulation routing is assigned, the name of the modulated Control Panel
parameter will be underlined and colored red.
For step-by-step instructions on accomplishing common modulation-related tasks,
please see "Using Modulation," beginning on page 30.
Source A and B
An extensive set of MIDI modulation sources is available. For a complete list,
see"Modulation Sources," on page 94.
Amount A and B
-100 to +100. This sets the amount by which the modulation source affects the
Control Panel parameter.
The amount is a percentage of the total range of the parameter. When the Amount
is set to +100, a MIDI modulation value of 127 will take the parameter all the way to
the maximum value, even if the Control Panel knob or slider is at its very lowest
setting.
OASYS PCI
Modulation Palette
97