Korg Soundlink DRS OASYS PCI User Manual page 120

Preferences
Remember. With this setting, the Catalog will be opened at startup if it was open
the last time the OASYS PCI Editor was closed.
Host Processing
Synthesis and Effects algorithms predominantly use the onboard DSPs, but also
sometimes use the main CPU, the "host," for some non-audio functions, such as
non-audio-rate LFOs. The algorithms prioritize different host functions, so that
they are updated at one of four rates, and therefore use only the necessary amount
of CPU processing power. These four parameters set those update rates.
To change the amount of CPU processing power used, you can adjust these rates.
Doing so may affect the sounds of some algorithms, however.
Host Rate 1. This is the update rate, in milliseconds, for Host Rate 1. The default
value is 4. This is generally used for non-audio-rate LFOs.
Host Rate 2. This is the update rate, in milliseconds, for Host Rate 2. The default
value is 8.
Host Rate 3. This is the update rate, in milliseconds, for Host Rate 3. This also sets
the update rate for all audio meters. The default value is 30.
Host Rate 4. This is the update rate, in milliseconds, for Host Rate 4. The default
value is 100.
OASYS PCI Folder Location
This parameter tells the OASYS PCI Editor the location of the OASYS PCI folder,
which contains all of the Programs, Patches, Effects, and Scales for the OASYS PCI.
Pressing the Choose button brings up a standard file dialog, allowing you to select
the location of the folder.
If you need to move the OASYS PCI folder, or if the OASYS PCI Editor cannot find
the folder, use the Choose button to select the correct folder.
Resource Monitor
This controls whether the Resource Monitor window (described on page 105)
shows a summary or a detailed report.
Summary. With this setting, the Resource Monitor will show a concise summary of
system resource usage. This is the default setting.
Detailed. With this setting, the Resource Monitor will show a detailed report of
system resource usage.
Multi Defaults
Master Output Bus
This sets the default Master Output Bus for new Multis. You can select any of the
six Output Busses: Analog L-R, S/PDIF L-R, ADAT 1-2, ADAT 3-4, ADAT 5-6, or
ADAT 7-8.
116
Reference
OASYS PCI