Korg Soundlink DRS OASYS PCI User Manual page 52

Using Audio Programs
Note that you can also use the main mixer to set up effects for monitoring, such as
reverb on a vocal. For more information, see "Record monitoring with effects,"
below.
To access the monitor mixer settings:
1.
For information on how to open the ASIO control panel, please see "ASIO Control
Panel/ Audio Settings," on page 123.
The monitor mixer controls are on the left side of the control panel.
2.
Multiple inputs can be routed to the same output, if desired.
3.
4.
5.
The settings will automatically be saved to the OASYS PCI Preferences file, so they
are maintained until you change them again. The settings are shared between all
audio programs.
6.
Most digital audio programs also have software-based record monitoring. If you
are using the OASYS PCI's monitor mixer, you should disable the program's
software-based monitoring. Consult the program's manual for details.
Record monitoring with effects
Using the OASYS PCI's main mixer, you can record from the audio inputs and
monitor through effects, all with zero latency. For instance, you can record vocals,
and send the vocals to a reverb to enhance the singer's headphone mix–but record
only the dry vocal sound.
To do this:
1.
2.
3.
Now, you'll set up the monitor path using the OASYS PCI mixer.
4.
5.
Since the audio program is recording directly from the audio inputs, these effects
will only be heard in the monitor path. If you prefer, of course, you can also record
48
From the digital audio program, open the OASYS PCI ASIO control
panel/Audio Settings window.
Set the volume level and output assignment for each input, as desired.
To mute a channel, turn its volume all the way down (-144dB).
To mute all inputs at once, press the Mute All button.
When you're finished, press OK to close the window.
In the digital audio program, disable software-based record monitoring.
In the OASYS PCI ASIO control panel/Audio Settings window, press the
Mute All button to mute the monitor mixer.
Also in the ASIO control panel/Audio Settings window, under Record
Source, select Audio Inputs.
When you're finished, press OK to close the window.
Assign the input to a channel in the OASYS PCI mixer.
Set up any desired insert or send effects.
Using the OASYS PCI
OASYS PCI