Korg Soundlink DRS OASYS PCI User Manual page 18

Using Multis
Connect and Disconnect commands
When adding several Programs in a row, you can speed things up by using the
Connect and Disconnect commands, as described on page 17.
What if I get an error message?
If you try to add a Program, but get an error message stating that there is not
enough processing power to play the Multi, you may need to reduce the number
of voices of the Program (or of other Programs), reduce the number of Effects
being used, or otherwise free up system resources.
For more information, please see "Managing Resources," on page 60.
Auto-Load FX controls how Effects are loaded
Programs store their own Insert Effects. You can use the Mixer Channel's Auto-
Load FX parameter to control whether or not these Effects will be added to the
Mixer when the Program is loaded.
If Auto-Load FX is turned on, then the Program's Effects will be loaded into the
Insert Effects slots. If there were already Insert Effects on the channel, they will be
deleted.
If Auto-Load FX is turned off, then the Program's Effects will not be loaded, and
any previously loaded Insert Effects will stay as they were. This is useful if you
have created a complex Effects setup, and wish to audition different Programs
using the same Effects.
Loading an Effects-Only Program into a Multi
Effects-Only Programs store all of the Insert Effects for a Mixer Channel, including
all Effects Control Panel parameters. You can use them to load chains of Effects
into a Mixer Channel, or to store such chains for use in other Multis.
Effects-Only Programs are just normal Programs without any Patches loaded into
the Patch slots. Unlike normal Programs, Effects-Only Programs can be used on
any type of input, including Audio Inputs, Streams, or even other Programs.
In the Korg factory voicing, they will be placed in the Programs section of the
folder named "Korg Effects."
To load an Effects-Only Program:
1.
FX Auto-Load must be enabled in order to load an Effects-Only Program.
1.
2.
3.
(MacOS only: Alternatively, you can select the slot and then double-click the name
of the Effects-Only Program in the Catalog.)
14
Make sure that FX Auto-Load is enabled on the desired Channel.
Open the Catalog, by selecting it from the Windows menu.
In the Catalog, select the Program tab.
Drag an Effects-Only Program from the Catalog onto the Input slot.
Using the OASYS PCI
OASYS PCI