H806 Series – Mechanical Oven
5.0
Service and Maintenance
General Information
Repair work should only be carried out by a suitably qualified person in
accordance with all national and local safety regulations.
The appliance should be disconnected from the mains before repair work
is commenced.
5.1
Removal from a Housing Unit
1. Remove the fixing screws as indicated in Figure 5-1 and pull the
appliance forward by about 20 cm.
2. Unfasten the screws holding the top cover plate – refer to Figure 5-2.
Figure 5-1: Removal from a Housing Unit
31
Technical Information