Condensation Below The Doors; H806 B2, H809 B2 - Miele H806 Series Technical Information

Technical Information
6.2

Condensation Below the Doors

6.2.1

H806 B2, H809 B2

Fault
Condensation forms and runs down between the door and oven cavity.
Possible cause
Insufficient or poor sealing between door and cavity.
Fault rectified
Units modified in production have been marked with a 23 mm Ф blue
circle as follows:
a. on the unit's record card and
b. on the casing at the rear next to the connection details.
For models
H806 B2 from Machine no. 11/26526387 and
H809 B2 from Machine no. 11/26556776 the modifications under
Point D have already been carried out.
Remedy
Carry out the measures noted in the Conversion Instruction 7.1.
2 Door seals
2 Lamp rosettes
Vented fascia with drip protection 3066790
1 upper door – Dark brown
1 upper door – White
1 upper door – Jet black
1 upper door – White
1 lower fixing strip – DB
1 lower fixing strip – W
1 lower fixing strip – JB
1 fixing strip seal
Table 6-2: H806 B2 - Parts Required
Part Required
44
H806 Series – Mechanical Oven
Part Number
3360251
3430780
2492233
2492273
2807422 (USA only)
2807401 (USA only)
3291930
3292040
3292110 (USA only)
3121700