Connecting A Component Video Source - Epson PowerLite 825 User Manual

Component-to-
VGA cable
(ELPKC19)
note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or Component
Video (see page 93).
Connecting to Computers, USB Devices, and Other Equipment
46

Connecting a Component Video Source

You will need a component-to-VGA cable, or a component video
cable and adapter, for this connection. You can order the
component-to-VGA cable (ELPKC19) from Epson; see page 13 for
more information.
1. Connect the VGA-end of the cable to the blue
connector on the projector.
Computer2
2. Insert the three component ends of the component-to-VGA cable
into the color-coded output ports on your video source, usually
labelled
Y, Pb, Pr
3. If you want to play sound through the projector, see page 49 for
instructions on connecting audio cables.
4. If you don't need to make any other connections, see page 18 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, press the
remote control or the
control panel and select
source.
Connect component-
to-VGA cable
or .
Y, Cb, Cr
button on the projector's
Source Search
or
Computer1 Computer2
or
Computer1
button on the
Search
as the image