Enabling Wep Encryption - Epson PowerLite 825 User Manual

Enabling WEP Encryption

1. Press on the projector remote. Highlight
Menu
then press .
Enter
2. Choose
Network Configuration
3. Highlight
Security
screen:
4. For the WEP encryption setting, select
.
Enter
5. For Format, highlight
enable hexadecimal input, then press
6. If you chose
64Bit
Highlight the
Encryption key
Key ID you selected, then press
select individual letters; then press
add a blank space or to navigate backward and forward through
the input text, highlight the arrows and press
and press
, then press . You see the following
Enter
128Bit
to enable text input or
ASCII
Enter
, choose
Encryption key 1
text box that corresponds to the
. Use the
Enter
Enter
and
Network
.
Enter
or and press
64Bit
to
HEX
.
, , , or .
2 3 4
buttons to
to input a character. To
. To toggle
Enter
Using the Projector on a Network
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try ASCII
first. If that doesn't work,
try Text2 and then Text3.
79