Epson PowerLite 825 User Manual page 124

Solving Problems
124
Make sure the lens is not fogged by condensation. You may need
■
to wait before using the projector after moving it from a cold
environment to a warm environment.
■ Make sure the projector is facing the screen squarely, to eliminate
the need for keystone correction.
■ Adjust the
Sharpness
When you change video settings, you should be able to see the
effect on the screen immediately. If you're projecting from a
computer, you may also need to adjust the tracking and sync as
described in the next section. If you don't like the new settings,
you can always select
settings.
You see vertical bands or the image still looks blurry after
trying the solutions in the previous section.
■ If you're projecting from a computer and displaying an image that
contains a lot of fine detail, you may notice vertical bands or some
of the characters may look heavy or blurred. Press the
button on the remote control to reset the projector's tracking and
sync settings.
If further adjustment is needed, you can fine-tune the
■
and settings manually using the Signal menu, as described
Sync
on page 92.
1. Fill the screen with an image containing fine detail, such as
black text on a white background.
2. Adjust the
Tracking
setting on the Image menu (see page 91).
to return to the factory default
Reset
to eliminate vertical bands.
Auto
Tracking