Using Ad Hoc Mode - Epson PowerLite 825 User Manual

Using the Projector on a Network
62

Using Ad Hoc Mode

To use Ad Hoc (computer-to-computer) mode, adjust your projector
and wireless card or adapter settings as described in this section.
Configuring the Projector
1. Press the button, then choose
Menu
2. Choose
Network Configuration
3. Choose
Wireless LAN
4. Make sure is selected for the Connection mode. If not, use
Quick
the buttons on the remote control to highlight
press to select it.
Enter
5. If your network is using 802.11a, use the
remote control to highlight
6. If your network card supports an SSID or ESSID name (see
page 66), highlight the
name:
Use the buttons to select individual letters; then press
to input a character. To add a blank space or to navigate backward
and forward through the input text, highlight the arrows and
press . To toggle symbol settings or capital letters, highlight
Enter
Network
and press
Enter
and press . You see this screen:
Enter
, then press
802.11a
text box, press
SSID Enter
and press .
Enter
.
, then
Quick
buttons on the
to select it.
Enter
, and enter a
Enter